Marine pen fish farms
The authorised activities are:
- the operation of a marine pen fish farm;
- the discharge to the water environment of fish excreta, uneaten food and other substances as listed in this permit; and
- the abstraction of more than 10m3/day of seawater
Authorisation level
Permit
Pre-application engagement
Pre-application public engagement is required for this activity. Before submitting your application, you must engage with the community to find out the views of those likely to be affected by the proposed activity and to gather relevant information about the potential impacts of the proposed activity. You will be asked to demonstrate that you have engaged and share the feedback received as part of the permit application process.
Public consultation
We may publicly consult on applications that, due to their nature or location, have higher likelihood of environmental impact and community impact. For this activity we may publicly consult on your application.
Read more about public participation and engagement
Fit and Proper Person tests
Fit and Proper Person tests apply to this activity. You will be asked in your application if you have any relevant convictions held by you or any additional persons.
Read more about Fit and Proper Person tests
Permit conditions
Permits may contain both standard conditions and conditions specific to the activity and location. The conditions of your permit will be decided when we assess your application. This is to ensure that the appropriate limits and controls are in place to minimise pollution and protect the environment.
If you carry out an activity under a permit authorisation you must comply with the conditions set out in your authorisation. It is an offence if you do not comply with the conditions.
SEPA will not authorise this activity if it poses an unacceptable risk to the environment.
Fees and charges
Application fee to apply for a new permit for this activity:
An annual activity fee applies to this activity. Read our charging information for further information on annual activity fees.
Information on the application fees to transfer, vary or surrender a permit that authorises this activity, is in our charging information
How to apply
In this section you can find out how to apply for a new authorisation, and how to apply for a variation, transfer and surrender of an existing authorisation.
New applications
You can apply for a new permit for this activity using our digital application service.
If you are applying for a new permit, we would encourage you to send a completed EASR pre-app proposal form to aquaculture.pre-app@sepa.org.uk before submitting your application.
Step 1: Download your activity form
You’ll need to download and complete the following activity form. The completed form will be submitted as part of your application:
Step 2: Provide supporting information
For a new permit, you’ll also need to provide the following supporting information:
- Location plan
- Non-technical summary of your application
- Evidence of pre-application community engagement carried out
- Pre-application proposal form (if applicable)
- Details on what will happen to the proportion of faeces not discharged
- Model calibration and validation data
- Information on deposition modelling of organic solids
- Information on nitrogen compound modelling (if required)
- Information identifying any relevant protected species and habitats within the modelled deposition footprint of the farm
- Information on other uses of the coastal waters within the modelled deposition footprint of the farm
- Details on measures to be taken on the timing of fallow periods to avoid interactions between sea lice from the farm and wild Atlantic salmon
- Details on the enclosure of the pens (if required)
- Information on sea lice modelling (if applicable)
- Information on surveys to collect data for calibrating and validating sea lice dispersion modelling (if applicable)
- Details on what will happen to the proportion of anti-sea lice medicines not discharged
- Information on azamethiphos discharge modelling (if applicable)
- Information on deltamethrin discharge modelling (if applicable)
- Information on emamectin benzoate discharge modelling (if applicable)
- Information on the fate and behaviour in coastal waters of medicines or chemicals (if applicable)
- Information on the ecotoxicity of the medicines or chemicals (if applicable)
- Information about any dispersion and/or dispersion modelling about the medicines or chemicals (if applicable)
- Model calibration and validation data about the medicines or chemicals (if applicable)
Step 3: Submit using our digital application service
You can submit your completed application using our digital application service.
Make an application for a new authorisationYou can apply to vary an existing permit for this activity
If you are applying for a standard or technical variation, we would encourage you to download and complete:
And submit it to aquaculture.pre-app@sepa.org.uk before progressing with your application to vary your existing permit.
After pre-application is concluded you can then apply for a variation
Step 1: Download your variation form
You will need to download and complete the following variation form. The completed form will be submitted as part of your application:
Step 2: Download your activity form
If you are applying for a standard or technical variation, you will need to download and complete the following activity form. The completed form will be submitted as part of your application:
or
If you are applying for a pen layout change, please instead download and complete:
Step 3: Provide supporting information
For a variation, you will need to provide supporting information. The type of information you will need to submit will depend on what you are applying to change but will include at least some of the following:
- Location plan
- Non-technical summary of your application
- Evidence of pre-application community engagement carried out
- Pre-application proposal form (if applicable)
- Details on what will happen to the proportion of faeces not discharged
- Model calibration and validation data
- Information on deposition modelling of organic solids
- Information on nitrogen compound modelling (if required)
- Information identifying any relevant protected species and habitats within the modelled deposition footprint of the farm
- Information on other uses of the coastal waters within the modelled deposition footprint of the farm
- Details on measures to be taken on the timing of fallow periods to avoid interactions between sea lice from the farm and wild Atlantic salmon
- Details on the enclosure of the pens (if required)
- Information on sea lice modelling (if applicable)
- Information on surveys to collect data for calibrating and validating sea lice dispersion modelling (if applicable)
- Details on what will happen to the proportion of anti-sea lice medicines not discharged
- Information on azamethiphos discharge modelling (if applicable)
- Information on deltamethrin discharge modelling (if applicable)
- Information on emamectin benzoate discharge modelling (if applicable)
- Information on the fate and behaviour in coastal waters of medicines or chemicals (if applicable)
- Information on the ecotoxicity of the medicines or chemicals (if applicable)
Read vary an existing authorisation to find out how to submit your application for a variation.
You can apply to transfer an existing permit for this activity.
Step 1: Download your transfer form
You will need to download and complete the following transfer form. The completed form will be submitted as part of your application:
Step 2: Submit your application
Read transfer an existing authorisation to find out how to submit your application for a Transfer.
To apply to surrender an existing permit that authorises this activity, read surrender an authorisation.